Intrinsic vs. Extrinsic Motivation Research Paper

Intrinsic vs. Extrinsic Motivation - Research Paper Example perform at the best possible level. This motivation could be innate or derived from external forces/functions, referred to as intrinsic motivation and extrinsic motivation, respectively. Level and/or intensity of these two types of motivation have an impact on individual’s commitment, interest, and ability to perform, learn and progress in all aspects of life, be it learning, working, or performing any other activity. Moreover, individuals are variably inclined towards extrinsic and intrinsic rewards. Extensive theorizing and research have pointed out that both these motivations are impacted by each other and that they either enhance or undermine impact of the other. This study explores this aspect of motivation while comparing and contrasting both types, with support derived from theories, researches and practical applications. Getting inspired by engaging in activities that produce excitement and challenge is a basic human nature and is one of the core routes towards human development (Sansone & Harackiewicz, 2000). The Cognitive Evaluation Theory explains intrinsic motivation as individual’s opinion or feeling and competence rather than an inner urge itself. Here the control and learning aspects emerge when rewards are attached to task accomplishment. The CET proposes that an individual’s intrinsic motivation is based on control and information. It proposes that if the individual’s locus of control lies outside, then intrinsic motivation is low and if it lies inside, then intrinsic motivation is high; secondly, if the individual has positive information of competence, knowledge, and/or stimulation, then intrinsic motivation is higher and vice versa (Weinberg, 2009). Traditionally, extrinsic rewards were considered as harmful because extrinsic motivation was compared with extrinsic pu nishment (Cameron & Pierce, 4). The CET theory forms the base for understanding intrinsic and extrinsic motivation as well as many arguments with respect to

National Geographic Essay Example for Free

National Geographic Essay The first website is the National Geographic (www.nationalgeographic.com), which is very diverse in terms of the topics it features and discusses on their site. It talks about the environment, humanity, history, entertainment, and travel. Due to the variety of topics, the website caters to everyone and anyone who seek reliable information. Five topics were researched including the brain, heart, skin, digestive system, and lungs. The search was very easy because the website has its search option where users can type what they are looking for and the website will generate the nearest results that it can find. Other topics can also be accessed with ease because the website features hyperlinks on the left side and on top, which are very easy to find. For the topics that were researched, images and graphics were available for users to understand the topic better. It also has a â€Å"Daily News† section, which features the latest news about the environment, space, and people. The website does not contain any grammatical errors and information are organized in such a way that they fall in the proper category. It also posts contact information so that users can contact the company if they want to research more or if they want to verify what they have learned. Considering that National Geographic is a known company with its own television channel, it is not hard for users to trust the content of its website. The website is very easy to navigate and it presents everything in such a way that users would not question the contents. For those who would use the website to research on educational topics, they would certainly find useful and accurate information because the National Geographic is known to conduct researches, documentaries, and studies. The company consults professionals and specialists to make sure that everything they post are correct and accurate. Wellness. com is a community for people who want to learn more about wellness and improve their lifestyles. It is also a place where people who have knowledge about wellness and healthy living can share what they know to those who want to obtain information. According to the website, it aims to create a place where people can obtain wellness information that can be trusted and used by everyone. In terms of evaluating the website for its accuracy and reliability, it can be said that the website can probably do better. Much of the information posted can be questioned because the authors are the members of the community and everyone just shares information with each other through the site’s forums. The members can post blogs about different topics, mostly about simple things like lying to get treatment for menopause, self-criticism, and breast cancer. The website has its search option that would return results from the site’s blogs and forums. Due to the importance of obtaining health-related information only from professionals, the website lists providers by category. Users are also given the option to search a provider by name. Information on health is categorized and listed alphabetically so that users do not have a hard time finding specific topics. It also offers wellness information for pets so that users who have pets have a place to gather information. Multimedia content is not available in this website and there are not much images featured. However, to compensate for its cons, the website has its contact page where people can contact the organization if they have any inquiries or recommendations. Overall, it is not a great place to obtain accurate information but it is a good place to find people who share the same experiences and thoughts. If a person wants to find a community to belong to in terms of wellness and health, then Wellness. com is the right place to go.

Engineering Ethics Essay

Engineering Ethics Essay Engineers tend to practice their profession as members of teams, led and managed by senior engineers who are employees, even though they also assume the role of employers in many aspects of their relationships with their juniors The more senior engineers tend to be concerned with the leadership and management of large resources of men, materials and finance over which they have control It is the juniors who are more involved in the detailed technical practice of the profession; and technical direction comes from middle levels of the organizational structure Management implies responsibility and in engineering management, the professional engineer is responsible in a very direct sense for control over the resources of the community Engineering therefore, is a unique profession in which all of the marks of the professional man have crucial importance: he must have high-level skills and he must develop different skills as his career advances he must have a strong motivation for service because everything he does impinges on the community in some way or other The whole community is the ultimate client rather than the individual clients as in the case with other professions 2.2 Ethics and Professionalism Engineering is closely involved in human relations and in business and commerce A great many of the special problems in personal conduct met by engineers are likely to arise from this fact Ethics means something more than law and morals , it carries an additional connotation of rightness The Code is a statement of the principles of rightness, of broad scope and with enough detail to enable an intelligent man to deduce for himself the course of his own professional conduct The essence of all professional codes is that the professional man must be worthy, through his conduct, of the trust placed in him by the community and his colleagues To act every situation in a manner that will add to the confidence and esteem in which his profession is held by the community A profession is no better than its individual members. If they do not have the professional attitude and live by the rules of the profession, they have no profession Most professional engineers adopt an institutional view of the organizations of the profession: deserving, even requiring, the loyalty of each engineer as an expression of his identity as a professional engineer organizations are the manifestation of the professional entity and they require the giving of effort, loyalty and financial support without thought to direct personal gain Instrumental view of the professional organizations: support is given, sometimes grudgingly, on the basis of an expected return in some tangible form The instrumental view should have no place in the value system of the man who aspires to true professional status 2.3 Engineers and Society We are responsible for our own image If we want the public to appreciate our work then we must first do an excellent job We must be aware of technological advancements, be designers instead of users and get involved in research and development We have the brains, the technology and the expertise, we just need effort and commitment from ourselves Engineers provide not only the necessary human resources for the infrastructure development of a country but also important devices necessary for the welfare of the public Engineers yield a degree of influence over formulators of policies and decision makers. If this influence is based on the self-interests of individuals or a minority in which case the interests and welfare of the wider community becomes of secondary importance. Corruption is an extreme example of this Because of the significance and influence of professionals in society, the value systems which govern their lives and attitudes are needless to say, of great importance By professional ethics or professionalism, one is referring to a philosophy of work that values and emphasizes the positive qualities in a job or occupation One would also need to consider the wider implications of ones occupation in social and moral contexts 2.4 Code of Ethics In every profession, there are various sets of positive qualities. One, a universal set of qualities which pertain to any job or occupation like dedication, diligence and honesty A second set of positive qualities are those which are particular to the job or occupation at hand The third category is professional ethics and this is the category of social and moral awareness of the implication or effects of ones job on the wider community and environment Ethics Ethics is the study of morality. It studies which actions, goals, principles, policies, and laws are morally justified It refers to moral values that are sound, actions that are morally required (right) or morally permissible (all right), policies and laws that are desirable Accordingly, engineering ethics consists of the responsibilities and rights that ought to be endorsed by those engaged in engineering, and also of desirable ideals and personal commitments in engineering Engineering ethics is the study of the decisions, policies, and values that are morally desirable in engineering practice and research Morality concerns respect for persons, both others and ourselves It involves being fair and just, meeting obligations and respecting rights, and not causing unnecessary harm by dishonesty and cruelty In addition, it involves ideals of character, such as integrity, gratitude, and willingness to help people in severe distress And it implies minimizing suffering to animals and damage to the environment As related to engineering ethics, these skills include the following: Moral awareness : proficiency in recognizing moral problems and issues in engineering Cogent moral reasoning : Comprehending, clarifying, and assessing arguments on opposing sides of moral issues Moral coherence: Forming consistent and comprehensive viewpoints based upon a consideration of relevant facts Moral imagination : Discerning alternative responses to moral issues and receptivity to creative solutions for practical difficulties Moral communication: Precision in the use of a common ethical language, a skill needed to express and support ones moral views adequately to others Moral reasonableness: The willingness and ability to be morally reasonable Respect for persons: Genuine concern for the well-being of others as well as oneself Tolerance of diversity: Within a broad range, respect for ethnic and religious differences, and acceptance of reasonable differences in moral perspectives Moral hope: Enriched appreciation of the possibilities of using rational dialogue in resolving moral conflicts Integrity : Maintaining moral integrity, and integrating ones professional life and personal convictions. 2.4.2 Meanings of Responsibility Obligations. Responsibilities are obligations-types of actions that are morally mandatory. Some obligations are incumbent on each of us, such as to be honest, fair, and decent Other obligations are role responsibilities, acquired when we take on special roles such as parents, employees, or professionals Accountable Being responsible means accountable. This means having the general capacities for moral agency, including the capacity to understand and act on moral reasons It also means being answerable for meeting particular obligations, that is, liable to be held to account by other people in general or by specific individuals in positions of authority We can be called upon to explain why we acted as we did, perhaps providing a justification or perhaps offering reasonable excuses Wrongdoing takes two primary forms: voluntary wrongdoing and negligence Voluntary actions occur when we knew what we were doing was wrong and we were not coerced Some voluntary wrongdoing is recklessness, that is, flagrant disregard of known risks and responsibilities Other voluntary wrongdoing is due to weakness of will, whereby we give in to temptation or fail to try hard enough Negligence occurs when we unintentionally fail to exercise due care in meeting responsibilities. We might not have known what we were doing, but we should have Conscientious Morally admirable engineers accept their obligations and are conscientious in meeting them. They diligently try to do the right thing, and they largely succeed in doing so, even under difficult circumstances 2.4.3 KEY CONCEPTS Ethical dilemmas, or moral dilemmas : situations in which reasons, conflict, or in which the application of moral values is problematic, and it is not immediately obvious what should be done Steps in resolving ethical dilemmas : (1) Moral clarity : Identify the relevant moral values (2) Conceptual clarity (3) Informed about the facts. Obtain relevant information (4) Informed about the options: Consider all genuine options (5) Well-reasoned: Make a reasonable decision Right-wrong, better-worse: Some ethical dilemmas have solution that are either right (obligatory) or wrong (morally forbidden); other dilemmas have more that one permissible solution, some of which are better or worse that others either in some respects or overall 2.4.4 Importance of codes of ethics Codes of ethics state the moral responsibilities of engineers as seen by the profession and as represented by a professional society Because they express the professions collective commitment to ethics, codes are important in stressing engineers responsibilities and also the freedom to exercise them The essential roles of codes of ethics: (1) serving and protecting the public (2) providing guidance (3) offering inspiration (4) establishing shared standards (5) contributing to education (6) deterring wrongdoing (7) strengthening a professions image 2.5 Regulations on professional conducts All professional groups have two main characteristics: (1) Professionals in the same discipline institutionalize themselves into a professional body with recognized standards of academic and practice qualifications for membership. (2) The professional body has a Code of Ethics to govern the conduct of its members and disciplinary procedures in the event of breach of such Code. When we speak of a Code of Ethics, we are not talking about law In the Code of Ethics, our concern is with what is morally right or wrong Situations which require the Professional Engineer to consider the morality of his actions arise under circumstances in which they may exist conflict of interest between the individual professional and any or all of the entities with which he has to interact i.e. Community, Employer, Clients and/or Peers The professional owes a duty of care towards those he serves in ensuring that their interests are protected, and in this respect, there is a guideline which is what the Code of Ethics is all about The three Professional Engineering bodies in Malaysia have complementary functions in the regulation of professional conduct All three bodies have their own Code of Ethics designed to suit their specific requirements according to the objectives for which each body is constituted IEM Code of Ethics The Code of Ethics of IEM, lays down general guidelines for the conduct of members vis-Ã  -vis his relationships and transactions with: (1) The community (2) The Employer (3) Clients (4) Peers The IEM Regulations on Professional Conduct tend to be general because the IEM comprises a very wide cross-section of engineering disciplines as well as types of professional employment and businesses IEM Code embraces many areas involving moral and philosophical considerations including public safety and health, conservation of resources and environment, upgrading of technology, assuming responsibility within ones competence The IEM code also includes the dos and donts in the conduct of affairs between Engineer and employee, clients and peers While the dos and donts are clear cut and easily understood, the moral and philosophical issues can be subject to various interpretation Board of Engineers Code of Professional Conduct Under Section 15 of the Engineers Act 1967, the Board may order the cancellation of the registration of any engineer, if:- (1) he is guilty of fraud, dishonesty or moral turpitude; (2) he accepts illicit commission; (3) he fails to disclose to his client any vested financial interest in his dealings with the client This Code of Professional Conduct has the force of law and breach of any of the rules embodied in the BEM code may subject the offender to penalties provided for under the Engineers Act including the ultimate penalty of de-registration Therefore, in viewing the role of the BEM as a regulating body, its power to act in law must be taken into account BEM code can at best distinguish between what is legal and what is not, and may be regarded as the baseline or minimum level of ethics that ought to be maintained All the rules in the Code except two consist of clear cut Dos and Donts These rules concern what an Engineer shall or shall not do in the course of his employment or private practice and are extremely clear cut and unambiguous All these rules are concerned with the prevention of situations which may possibly give rise to conflict of interest between the Engineer, his employer or his clients The other two, Rule No. 25 and 26, are more abstract and tend towards issues of morality which may have no useful function in law simply because they are subjective and unenforceable Association of Consulting Engineers, Malaysia (ACEM) The affairs of the ACE are governed by their memorandum and articles of association The Association of Consulting Engineers has prescribed rules in their memorandum and articles of association and these rules are more specific to Engineers who practice as Consultants The ACE Code of Ethics is enunciated under the heading Duties of Members as set out in Articles 16 to 27 of their articles of association A study of these articles will reveal that when it comes to practice matters, the ACE has gone to great lengths to be more specific and detailed than either the BEM or IEM, and have laid down some clear and strict rules This is due to a Consulting Engineers excessive involvement in business or other commercial ventures, especially those which are of a nature related to his practice The ACE Code is designed for areas like, advertising and promotion of works, fees and other remuneration, competition with other members, submission of bids or proposals and related subjects. As for moral and philosophical issues, it is covered by Rule 16 which reads: Every member, in his responsibility to his clients and the profession, shall have full regard to these rules, to the rules of the professional Institution or Institutions to which he belongs and to the public interest. Code of ACE places an onerous duty on its members to conform to both the IEM and BEM Codes as well as their own specific rules governing the conduct of Consulting Engineering business 2.6 Applying global ethics in engineering organizations Globalization refers to the increasing integration of nations through trade, investment, transfer of technology, and exchange of ideas and culture Global interdependency affects engineering and engineers in many ways as in multinational corporations where moral challenges arises: Who loses jobs at home when manufacturing is taken offshore? What does the host country lose in resources, control over its own trade, and political independence? What are the moral responsibilities of corporations and individuals operating in less economically developed countries? Technology transfer is the process of moving technology to a novel setting and implementing it there Technology includes both hardware(machines and installations) and technique (technical, organizational, and managerial skills and procedures) A novel setting is any situation containing at least one new variable relevant to the success or failure of a given technology: example, the setting may be a foreign country Appropriate technology refers to identification, transfer, and implementation of the most suitable technology for a new set of conditions and it includes social factors Case study: BHOPAL Union Carbide in 1984 operated in 37 host countries in addition to its home country, USA On Dec.3rd, 1984, the operators of Union Carbides plant in Bhopal, India became alarmed by a leak and overheating in a storage tank The tank contained methyl isocyanate (MIC), a toxic ingredients used in pesticides Within 1 hour, the leak exploded that sent 40 tons of deadly gas into the atmosphere This is the worst industrial accident in history: 500,000 persons exposed to the gas 2500 to 3000 deaths within a few days 10,000 permanently disabled 100,000 to 200,000 injured 10 years later, 12,000 death claims and 870,000 personal injury claims had been submitted only $90 million of Union Carbides settlement had been distributed What went wrong? The disaster was caused by a combination of extremely lax safety procedures, gross judgment errors by local plant operators, and possible sabotage with unintended consequences Greater sensitivity to social factors was needed in transferring chemical technology to a country foreign to the supplier of the technology Government of India required the Bhopal plant to be operated entirely by Indian workers Union Carbide at first trained the plant personnel in its West Virginia plant US engineers make regular on-site safety inspections In 1982, financial pressures relinquish its supervision of safety at the plant 2 years later, safety practices eroded: personnel problems: high turnover of employees failure to properly train new employees low technical preparedness of local labour pool workers handling pesticides learned from personal experience than from safety manuals even after suffering chest pains vomiting, they fail to wear safety gloves and masks due to high temperature a result of lack of air-conditioning Move away from US standards(contrary to Carbides written policies) to lower Indian standards Extreme hazards: Tanks storing the MIC gas were overloaded (manual specifies that tanks must not be filled > 60%:extra space needed in emergencies to dilute the gas Standby tank was not empty for use as an emergency dump Tanks were supposed to be refrigerated but refrigeration was shut down to cut cost making the tank temperature 3 to 4 times what they should have been Sabotage: A disgruntled employee unscrewed a pressure gauge and inserted a hose into it not realizing that it would cause immense damage Negligence: A new worker was to flush out some pipes filters. He closed the valves but failed to insert the safety disks to back up the valves in case they leaked. He knew that valves leaked but did not check for leaks: It was not my job! The safety disks were the responsibility of the maintenance dept., and the position of second-shift supervisor had been eliminated By the time they noticed a gauge showing mounting pressure and began to feel the sting of leaking gas, their emergency procedures were unavailable: A venting gas scrubber to neutralize the gas was shut down because it was assumed to be unnecessary during times when production was suspended Flare tower to burn off escaping gas missed by the scrubber was inoperable because a section of the pipe connecting it to the tank was being repaired Workers sprayed water 100 ft to the air but the stack was 120 ft Within 2 hours , most of the chemicals had escaped and form a deadly cloud over hundreds of thousands of people in Bhopal There were thousands of squatters in the areas surrounding the plant with hopes to find employment as well to take advantage of available electricity and water None of the squatters had been officially informed of the danger posed by the chemicals produced next door to them No emergency drills No evacuation plans What are the moral responsibilities of multinational corporations like Union Carbide? Ethical relativism: the view that actions are morally right within a particular society when they are approved by law, custom etc. This is false because it might excuse moral horrors, ex: it would justify low standards if that were all a country requires Ethical absolutism: retains precisely the same practices endorsed at home, never making any adjustments to a new culture This is also false because it fails to take account of many variable facts Ethical relationalism: the view that moral judgments are contextual in that they are made in relation to a wide variety of factors including the customs of other cultures 2.7 Technology and the work ethics Technology : Value-neutral or value-laden? Value-neutral : says that technology consists of artifacts or devices -machines,tools, structures perhaps together with knowledge about how to make and maintain devices Value-laden : says that technology consists of value-guided organizations and general approaches, in addition to artifacts and knowledge Technological determinism is the view that the primary structures of human society are determined by technology, rather than human beings controlling technology Social constructionism is the view that emphasizes 2 way causal interactions between technology and society highlights the importance of human perceptions interpretations An example: automobile It is a necessity but the effects include the depletion of world oil supplies, pollution and deaths(accidents) If technology dramatically influences us, we also shape the directions of technology Another example : Tomato harvester- plucks and sorts tomatoes with a single pass. Cost of harvesting tomatoes was reduced. But jobs were lost, small growers forced out of business. Funding to develop new technology comes from the taxpayers Engineers need to understand how their work affects public life As managers, entrepreneurs, consultants government officials, engineers provide many form of leadership that should include moral leadership in developing and implementing technology within their professions communities Moral leadership is the success in moving a group toward morally desirable goals using morally desirable procedures

Genetic Engineering is the Future Essay -- Expository Essays Research

Genetic Engineering is the Future The debate over genetic engineering has emerged as one of the hot topics of today's political mainstream. With new discoveries happening everyday, science is coming closer to achieving perfection in the art of genetic manipulation. But is it all worth it? Some people argue that genetic engineering is a corporate scandal, and simply allows large companies to make more money. I will show through my research that the benefits of gene alteration far outweigh the claimed consequences. The actual process of gene transfer is very complicated. The first companies to employ genetically altered products emerged only 40 years ago. With fast developing technology, researchers are able to examine entire stands of DNA. What scientists discovered is a three step process that is involved in the transfer of Genes. First, RNA becomes synthesized in the DNA, and the genetic code of the organism is inscribed. This is called transformation. Next the RNA is introduced to a new cell, called transduction. (Welsh, pg. 43) The first successful cell transfer was in bacteria. Once RNA was induced there was a conjugal transfer of the DNA between bacteria cells. (Welsh, pg. 45) The host bacteria adopted the same traits of the mother DNA cell. What scientists realized is that this process can be manipulated. Once sequences of DNA were analyzed there was an explosion of knowledge that was gained. Scientists unlocked the genes that were responsible for hundreds of different functions in plants and animals. In the agricultural industry, there is always a demand for better products. Strands of DNA in seeds have been researched greatly. What basically happens is science perfects hybridization. ("Food and ... ... Genetic Engineering. Probe Ministries International. . Heaf, David. Lists of Pros and Cons of Genetic Engineering. . Home Page. Arizona State University. 5 Apr. 2003 . Murray, K.. "Genetic Engineering: Possibilities and Prospects for its Application in Industrial Microbiology." JSTOR (1980): 369-386. 5 Apr. 2003 . Siegl, Gunter. New Aspects of Positive Strand RNA Viruses. Washington DC: American Society of Microbiology, 1990. Sonnino, A. Induced Variation for Potato Improvement. Lima, Peru: Information Sciences Department, 1991. Â  

Assessment Worksheet Essay

In a risk management plan you must first, establish the objectives. What is the exercise called when you are trying to identify an organization’s risk health? When trying to identify an organization’s risk health, you would use the Health Risk Assessment exercise. What practices helps reduce or eliminate risk? Risk Management. What on-going practice helps track risk in real-time? Risk Mitigation Given that an IT risk management plan can be large in scope, why is it a good idea to develop a risk management plan team? Scope identifies boundaries. So, if the plan is that large in scope, a team would work obviously together and not against to maintain its structure in nature and have consensus. Within the seven domains of a typical IT infrastructure, which domain is the most difficult to plan, identify, assess, remediate, and monitor? LAN-WAN From your scenario perspective, with which compliance law or standard does your organization have to comply? NERC-CIP Compliance: (critical infrastructure protection) plan is a set of requirements designed to secure assets vital to reliably operating North America’s bulk electric system. How did the risk identification and risk assessment of the identified risks, threats, and vulnerabilities contribute to your IT risk management plan table of contents? It was detailed properly to locate provided information needed. What risks, threats, and vulnerabilities did you identify and assess that require immediate risk mitigation given the criticality of the threat or vulnerability? None: All compliance was meet For risk monitoring, what techniques or tools can you implement within each of the seven domains of a typical IT infrastructure to help mitigate risk? Anything possible, man or man-made to properly assess, identify and deal with possible risks. For risk mitigation, what processes and procedures are needed to help streamline and implement risk mitigation solutions to the production IT infrastructure? I should start with each and every one of the seven domains, and do a risk analysis and trying to find vulnerabilities that could be exploited, and take necessary actions utilizing any tool available to mitigate or eliminate unnecessary risk if possible, for example disabling ports on an application server, web server, eliminating unnecessary processes, penetration testing and implementing a user awareness program and a strict AUP. How does risk mitigation impact change control management and vulnerability management? Change control is a systematic way to approaching change, within an org anization, it can prevent the possibility of services becoming interrupted and if so, provide a plan to bring them back up as soon as possible.

Wilderness Versus Wildness Essays

Wilderness Versus Wildness Essays Wilderness Versus Wildness Essay Wilderness Versus Wildness Essay Essay Topic: Into the Wild Letters From an american Farmer Wild Wilderness Versus Wildness BY teeiku1620 Wilderness and wildness are two words that present two different views of how nature effects civilizations. Wilderness has a positive connotation, meaning the forest and the beautiful aspects of nature. Wildness means living with no rules, and relying on the basic human instinct to survive. Hector St. John de Crevecoeur has displayed contradictory views on New Britain, and how the people living there conduct themselves. Both wilderness and wildness are concepts that represented New Britain nd show the struggle between incorporating what the Europeans brought to a new land, and the untamed land they settled. In Letters from an American Farmer, de Crevecoeur does not show any respect for those for those he considers wild. He views those who live in the forest as little more than savages. (p. 4) He believes that eating uncultivated meat has a physical and mental effect on them, which is ironic since now it is has been proven unhealthy to eat anything other than natural meat and unprocessed food. He onsiders people who live in the wild to be ferocious, gloomy, and unsociable. (p. 4) Also, he believes that they do not have much of a future, because they do not trust the other people who live like them. He views as animals, wing with each other for the next big kill. He is exaggerating some characteristics of frontier culture, and does not show proof for his generalizations. Although he is a little harsh in his beliefs and criticisms of people living in the forest, he does, however, tap into a core feature of settlers coming to a new untamed land. De Crevecoeur is making a case for pastoral living as opposed to hunting and gathering which can be more risky. Like so many others at the time, de Crevecoeur is quick to point out the beauty and opportunity for European immigrants that lay in New Britain at the time. He is amazed by the idea of infinite space and opportunity. Here, de Crevecoeur is not Just thinking of wilderness in terms of nature, but in terms ofa lack of restrictive social structure. He confirms this by saying, the rich and poor are not so far removed from each other as they are in Europe. (p. He is especially excited about the removal of the aristocratic families. He said, We have no princes, for whom we toil, starve, and bleed. (p. l) This quote also incorporates the idea of opportunity. The profits they make in this new land are for themselves, because there is no hierarchy requiring them to pay high taxes. Even though de Crevecoeur was harsh in his description of the wild people, he has really captured one of the biggest challenges of establishing a new civilization on a new open land. How do you protect the promise and opportunity of vast amounts of ature without living like a savage? If men are truly like plants taking all of the aspects of their lives from the environment around them, their social structure, and their religion to create their civilization, how do they prevent themselves from becoming an invasive species that crowd out all of the natural elements that existed before they came? (p. 2) There may never be right answers to these questions. As you can see with de Crevecoeur, he was constantly changing his mind about the balance between infinite space and an idealistic civilization.